Audi 80/Avant (B4)

Since 1991-1995 of release

Repair and car operation



Audi 80/Avant
+ The description
+ Engines
+ System of release of the fulfilled gases
+ Cooling system
+ Fuel tank and the fuel pump
+ The air filter and воздухозаборные channels
+ Injection system
+ Coupling
+ Transmission and transmission
+ Suspension bracket and steering
+ Brake system
+ Antiblocking system of brakes
- Wheels and tyres
   Wheels
   Wide tyres and wheels
   Pressure check in tyres
   The control of a condition of tyres
   Wheel replacement
   The control of an inhaling of wheel bolts
   Balancing of wheels
   Purchase of new tyres
+ Kuzovnaja electrosystem
+ Ignition system
+ Illumination
+ Signalling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ Body elements
+ Search of malfunctions
+ Specifications

Balancing of wheels

Neotbalansirovannye wheels are shown by vibration of a steering or потряхиванием переда. Both effects are especially strongly appreciable at опеределенных speeds. The reason – in non-uniform distribution of weight to a wheel. Therefore wheels should be отбалансированы statically and dynamically. For this purpose there are two methods:

 PERFORMANCE ORDER

  1. Wheel remove from the car and establish on the balancing machine tool. There it rotates in a skilled mode. The disbalance shown thus can be counterbalanced by placing of lead cargoes.
  2. For neutralisation of last disbalance carrying out of exact balancing is necessary. A disbalance of a nave of a wheel and a brake disk are thus counterbalanced also. The wheels established on front-wheel Audi 80, by force of the engine are resulted in necessary fast rotation, showing a residual disbalance. It again counterbalance lead cargoes.
  3. At all-wheel drive cars Audi 80 for carrying out of exact balancing it is necessary to lift all 4 wheels.
  4. In the absence of own drive back wheels of front-wheel models for carrying out of dynamic balancing are resulted by the electric motor with a frictional disk.

On the main page