Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation


Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
- 5. Fuel and exhaust systems
   5.1. Specifications
   5.2. An order декомпрессии fuel system
   + 5.3. The fuel pump and pressure of fuel
   5.4. Hoses and connections
   5.5. A fuel tank
   5.6. The fuel pump
   5.7. The gauge of level of fuel
   5.8. The air filter
   5.9. A cable throttle заслонки
   + 5.10. System of electronic injection of fuel (EFI-system)
   + 5.11. Units of system of injection of fuel
   5.12. Exhaust system service
   + 5.13. System of decrease in toxicity of the fulfilled gases
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. A suspension bracket and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

5.5. A fuel tank
THE GENERAL DATA

Fuel tank and accompanying details
1. A ventilating tube
2, 5. A lining
3. The otsechnoj valve
4. A mouth
6. A pillow
7. A jellied pipe top
8. A cover
9. A stopper
10. A guard 		11. A tape of fastening of a tank
12. A mouth hose
13. A tube
14. A tank
15. An arm
16. The holder of tubes
17. The pump
18. A guard bottom

Removal

PERFORMANCE ORDER
1. Devastate a tank a trip or through a drain stopper. Turn away a stopper of a mouth of a tank to remove residual pressure.
2. Disconnect the battery from weight.
3. Lift a back part of the car and establish on supports.
4. Merge the gasoline rests through a hose or a stopper.
5. Turn away screws (are specified by arrows) and disconnect a mouth.
6. Disconnect and muffle hoses (are specified by arrows).
7. Release bolts of fixing tapes of a tank.
8. Remove guards. Establish under a tank a prop.
9. Disconnect coupling tapes of a tank and take aside.
10. Lower a tank so that it was possible to disconnect a socket of conducting and the tyre of grounding from the pump and the gauge of level of fuel (if wires and the tyre are not disconnected not so).
11. Remove a tank.

Installation

PERFORMANCE ORDER
1. Installation is carried out upside-down.
2. If the car is equipped by a spare tank this tank can be removed, having turned away bolts on its perimetre.

Repair

Tank repair is carried out by skilled experts. Independently to repair a tank the soldering or welding it is forbidden.


On the main page