Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation

Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
- 5. Fuel and exhaust systems
   5.1. Specifications
   5.2. An order декомпрессии fuel system
   + 5.3. The fuel pump and pressure of fuel
   5.4. Hoses and connections
   5.5. A fuel tank
   5.6. The fuel pump
   5.7. The gauge of level of fuel
   5.8. The air filter
   5.9. A cable throttle заслонки
   + 5.10. System of electronic injection of fuel (EFI-system)
   + 5.11. Units of system of injection of fuel
   5.12. Exhaust system service
   + 5.13. System of decrease in toxicity of the fulfilled gases
+ 6. Transmissions
+ 7. Transmission elements
+ 8. Brake system
+ 9. A suspension bracket and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

5.9. A cable throttle заслонки


1. Disconnect the battery from weight.
2. Release counternuts of a tip of a cable on the case заслонки.
3. Turn the lever throttle заслонки and get a cable, having passed it through a groove in the lever.
4. Disconnect a cable from a pedal (are specified by arrows). Turn away two bolts of fastening of an arm of a cover of a cable to a partition of a motor compartment.
5. Working from within salon, stretch a cable through a partition of a motor compartment.


1. Installation is carried out upside-down.
2. Check up correctness of installation of rubber sealants in a wall of a motor compartment.


1. For cable adjustment press to the full a pedal, thus throttle заслонка it should be completely open. If заслонка has not opened completely release counternuts, press a pedal to the full and tighten counternuts so that заслонка it was completely open.
2. Check up adjustment. At release pedals заслонка it should be closed completely.

On the main page