Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation

9. A suspension bracket and a steering

THE GENERAL DATA

Forward suspension bracket "Toyota 4-Runner/Hilux/Surf"

1. The steering mechanism 2. Covers 3. Steering draughts 4. The stabilizer

5. The bottom spherical support 6. Поворотнае fists 7. The bottom levers 8. A suspension bracket rack

Back suspension bracket

1. The back bridge 2. The stabilizer 3. Collars 4. The bottom bars

5. Shock-absorbers 6. Springs 7. A cross-section bar

FORWARD SUSPENSION BRACKET

Forward suspension bracket independent, lever. Levers fasten to a rotary fist through spherical support. For reduction of an inclination of a body at turn the stabilizer of cross-section stability is provided. Elastic elements of a forward suspension bracket are racks with springs and shock-absorbers which represent uniform assemblage. From above the rack is fixed on a frame, from below – on an arm of the bottom lever.

BACK SUSPENSION BRACKET

Elastic elements of a back suspension bracket are springs and shock-absorbers. The suspension bracket fastens 4 longitudinal and one cross-section bars. For reduction of an inclination of a body at turn the stabilizer of cross-section stability is provided.

STEERING

Cars are equipped by the wheel hydraulic booster. The steering mechanism fastens to a cross-beam of a frame and incorporates to rotary fists through draughts.

Bolts and steering and suspension bracket nuts as a rule it is very difficult to turn on. For this purpose the connections amazed with corrosion are recommended to be cleared a brush and to moisten with a getting liquid. Sometimes carving connection it is possible to turn on sharp blows of a core on a nut. At отворачивании do not apply extension pieces, to use a torch flame extremely it is not recommended because of the raised risk of ignition or deformation of details of a steering and a suspension bracket. Tighten connections динамометрическим a key that will facilitate the subsequent dismantling.