Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation

Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
- 6. Transmissions
   + 6.1. A mechanical transmission
   + 6.2. Automatic transmission
   - 6.3. A distributing box
      6.3.1. Specifications
      6.3.2. Epiploons of forward and back flanges
      6.3.3. The box lever
      + 6.3.4. The electromagnetic switch (selector) of a forward axis
      6.3.5. Removal and installation of a distributing box
+ 7. Transmission elements
+ 8. Brake system
+ 9. A suspension bracket and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

6.3.3. The box lever
Removal and installation

PERFORMANCE ORDER

1. On cars without the selector of the forward bridge translate the box lever in position 4 High. On the cars equipped with the selector, translate the box lever in position High and establish the switch of a forward axis (2WD-4WD) in position Off.

2. Turn away the screw () fastenings of the handle and remove the handle.

3. On cars from a manual transmission remove the handle of the lever of a distributing box.

4. Remove the top forward panel of average section (subsection 10.23 see).

5. Disconnect a socket from the switch of the selector of a forward axis (if the selector is provided).

6. On cars from a manual transmission turn away 4 screws, remove a lever cover (a photo at the left) and a framework. Then get a lock ring (a photo on the right).

7. Remove the lever of a distributing box.

8. On cars with automatic transmission disconnect a rod from the lever, disconnect a socket, turn away 8 bolts and remove the management mechanism in a pine forest with the lever. Get a lock ring and remove the lever.

9. Establish the lever upside-down.

On the main page