Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation


Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
- 6. Transmissions
   + 6.1. A mechanical transmission
   + 6.2. Automatic transmission
   - 6.3. A distributing box
      6.3.1. Specifications
      6.3.2. Epiploons of forward and back flanges
      6.3.3. The box lever
      + 6.3.4. The electromagnetic switch (selector) of a forward axis
      6.3.5. Removal and installation of a distributing box
+ 7. Transmission elements
+ 8. Brake system
+ 9. A suspension bracket and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

6.3.5. Removal and installation of a distributing box Removal

PERFORMANCE ORDER
1. Remove the box lever.
2. Disconnect a hose сапуна.
3. Lift the car.
4. Remove a guard (arrows guard bolts are shown).
5. Merge from a distributing box oil.
6. Remove карданные shaft.
7. Disconnect from a box hoses and all sockets of conducting. Take wires aside.
8. Establish under transmission (check point) a prop. A prop not to clean before box installation.
9. Turn away bolts of a support of a distributing box.
10. Remove a cross-beam.
11. Establish under a distributing box a prop, it is recommended to fix a box chains.
12. Turn away 8 bolts of fastening of a box to картеру transmissions.
13. Be convinced that all necessary details are disconnected and displace a box back, keeping horizontal position. After an exit of a leading shaft lower a box and get from under the car.

14. If the box varies, remove the switch of a control lamp of the forward bridge, the switch of a control lamp демультипликатора (a photo at the left) and the gauge of speed (a photo on the right). Rearrange these details on a new box.
15. Check up a condition of rubber rings (arrow) of the gauge of speed, if necessary replace.

Installation

Installation is spent upside-down. Tighten bolts of a box with the set moment.
On the main page