Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
- 11. Suspension brackets, a steering
   11.2. Technical characteristics
   11.3. The general description of adjustment of wheels
   + 11.4. A forward suspension bracket
   + 11.5. A back suspension bracket
   + 11.6. A steering
   - 11.7. Semiaxes
      11.7.2. Technical characteristics
      11.7.3. Removal and installation of semiaxes
      11.7.4. Пыльники semiaxes
      11.7.5. Semiaxis repair
   11.8. Easily and easy
   11.9. Maintenance service of system of a steering
   11.10. Diagnostics of malfunctions of system of a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice



11.7.4. Пыльники semiaxes

Replacement

PERFORMANCE ORDER
1. Remove полуось from the car.

THE EXTERNAL HINGE

PERFORMANCE ORDER
1. Remove a fixing collar, unbend duster and remove hinge greasing.
2. Remove the external hinge from a semiaxis.
3. Remove a lock ring, a washer and the plug.
4. Clear the hinge and carefully examine it. Replace the hinge or полуось if it is necessary.
5. Wind шлицы with a sticky tape and establish new duster.
6. Establish a washer the curved party inside and establish into place the plug.

7. Establish a new lock ring.

8. Carefully fill the hinge with greasing and establish it on полуось.
9. Fill it on a lock ring.

10. Establish edge dusterа in a flute and raise edge dusterа to let the air out.

11. Establish fixing collars and tighten them.
12. Do not tear duster.

THE INTERNAL HINGE (MODELS WITH THE PETROL ENGINE AND THE MECHANICAL TRANSMISSION)

Semiaxis elements (models with the petrol engine and a mechanical transmission)

1. A stopronoe ring

2. A lining

3. An internal SHRUS

4. Пыльник

5. Полуось

6. A fixing collar

7. Пыльник

8. A collar

9. A washer

10. The plug

11. A lock ring

12. The external hinge


PERFORMANCE ORDER
1. Bring down an adjusting plate from the hinge.
2. Remove a lock ring.
3. Remove the hinge.
4. Remove a fixing collar dusterа and remove duster.
5. Clear and examine the hinge. Replace it if it is necessary.
6. Installation is spent upside-down removals.

THE INTERNAL HINGE (MODELS WITH THE DIESEL ENGINE AND MODELS WITH THE PETROL ENGINE AND THE AUTOMATIC TRANSMISSION)

PERFORMANCE ORDER
1. Remove the external hinge.
2. Remove internal duster.
3. Clear and examine the hinge. If it is worn out or damaged, replace полуось.
4. Carefully fill the hinge with greasing.
5. Wind шлицы with a sticky tape and establish duster into place.
6. Establish edge dusterа for a semiaxis ledge.
7. Raise edge dusterа to let the air out.

8. Ustanovitekrepezhnye collars also tighten them.
9. Establish the external hinge into place.

On the main page