Audi 100/A6

1990-1997 of release

Repair and car operation


Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
- 4. Cooling system
   4.2. Technical characteristics
   4.3. Hoses of system of cooling
   4.4. A radiator
   4.5. The thermostat
   4.6. The cooling fan
   + 4.7. Switches and gauges of system of cooling
   4.8. The water pump
   4.9. The heat exchanger liquid oil-/cooling
   4.10. Diagnostics of malfunctions in a contour of circulation of oil
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice

4.8. The water pump Removal

4-CYLINDER ENGINES

PERFORMANCE ORDER
1. Merge cooling liquid.
2. Remove приводные belts.
3. Remove the generator.
4. Remove the pump of the hydraulic booster of a steering.
5. Turn off fixing bolts and remove a pump pulley.
6. Remove fixing arms of the generator and the hydraulic booster pump
Steering.
7. Disconnect water hoses from the pump.
8. Turn off fixing bolts.
9. Remove the pump.
10. Remove a sealing ring.
11. Turn off fixing bolts and remove the pump and a lining.

5-CYLINDER ENGINES

PERFORMANCE ORDER
1. Merge cooling liquid.
2. Remove a back cover газораспределительного a belt.
3. Remove the pump of the hydraulic booster of a steering and fixing
Arm.
4. Turn off fixing bolts and remove the pump.

Installation

PERFORMANCE ORDER
Installation is spent upside-down removals. Establish a new sealing ring of the pump.


On the main page