Audi 100

1982-1990 of release

Repair and car operation



Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
- 7. Transmission
   + 7.1. Coupling
   + 7.2. A mechanical drive of deenergizing of coupling
   + 7.3. A hydraulic drive
   - 7.4. A transmission
      + 7.4.1. Type 014 four-speed transmission
      + 7.4.2. A five-speed transmission of type 013 or 093
      + 7.4.3. A five-speed transmission of types 016 and 012
      + 7.4.4. The mechanism of management of gear change КП of type 016
      - 7.4.5. An automatic transmission
         7.4.5.1. Removal and transmission installation
         7.4.5.2. The mechanism of management of switching by a transmission
         7.4.5.3. The electromagnetic switch of blocking of the lever of the selector
   + 7.5. A drive of forward wheels
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

7.4.5.3. The electromagnetic switch of blocking of the lever of the selector
THE GENERAL DATA

The mechanism of management of switching by a transmission of cars of release since August, 1988
1 – the handle of the lever of the selector;
2 – a casing;
3 – a protective cover;
4 – колодка the selector lever;
5 – the electromagnetic switch of blocking of the lever of the selector;
6 – a spring;
7 – the plug;
8 – the selector lever;
9 – a spring;
10 – an axis of the intermediate lever;
11 – the intermediate lever;
12 – the plug;
13 – a sealant of a cable of the selector;
14 – the mechanism case;
15 – a cable;
16 – a cable arm

Check

PERFORMANCE ORDER
1. To turn away the handle of 1 lever of the selector.
2. To turn away bolts of fastening and to remove a casing 2.
3. To remove a protective cover 3.
4. To establish the lever 8 selectors in position «R».
5. To check up by means of flat probeа 2 and if necessary to adjust a backlash between contact of the electromagnetic switch of blocking of the lever of the selector 3 and the lever of 1 selector which should be equal 1 mm.
6. To establish a protective cover 3.
7. To establish a casing 2 and to wrap bolts of its fastening.
8. To screw the handle 1 on the selector lever.


On the main page