Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
- 8. Transmission
   8.1.2. A plug - the main cylinder of coupling
   8.1.3. Press a coupling disk
   8.1.4. Malfunctions of coupling
   + 8.2. A mechanical transmission 012
   + 8.3. A mechanical transmission 01А
   + 8.4. An automatic transmission 089
   + 8.5. An automatic transmission 087
   8.6. Dismantling and assemblage of automatic transmissions
   8.7. The block of valves
   + 8.8. An automatic transmission 097
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
+ 12. A body, salon
+ 13. A central air
+ 14. An electric equipment

8. Transmission

8.1. Coupling

8.1.1. A coupling pedal
THE GENERAL DATA

The device of a pedal of coupling
1. The plug
Check up about deterioration, if necessary replace
Get with the help выколотки, establish by means of a vice
2. A returnable spring
3. A pedal arm
4. A returnable spring
Remove / establish the tool 3117
5. A clip
6. A clip
7. A coupling pedal
8. 20 Н.м.
9. A plug
10. A pin
11. The main cylinder of coupling
12. A hydraulic hose
13. A brake pedal
Adjust pedal height before adjustment of a plug of the main cylinder of coupling
14. A clip

Grease all bearings and rubbing surfaces with greasing MoS2.


The prevention

If the coupling pedal does not come back in a starting position properly even if the plug is adjusted correctly, the reason of it can be:

– Air in hydrosystem;
– Jamming of a returnable spring or the pedal plug.

The additional carpet covering should not interfere with a course of a brake pedal.



On the main page