BMW 3 series E30

Since 1983-1994 of release

Repair and car operation

8.2.5. A kick-down-mode cable

THE GENERAL DATA

Cables of management throttle заслонкой and automatic transmission

1. The lever throttle заслонки 2. A throttle branch pipe 3. A cable connecting throttle заслонку and a cam of the block of valves of transmission 4. A cam of a drive of the block of valves of transmission

5. A pedal 6. A cable throttle заслонки Arrows – directions of moving of levers by pressing a pedal of a drive throttle заслонки.

Adjustment

PERFORMANCE ORDER

1. Check up adjustment of a cable throttle заслонки (subsection 6.16 see). 2. Check up a backlash between the terminator and an end face of a carving tip of a cover of a cable. For adjustment release a counternut, establish a cover in the necessary position and tighten a counternut. 3. Release a counternut (2) switches (1) kick-down-modes under a pedal of an accelerator and wrap the switch to the full. 4. Press a pedal of an accelerator to notable resistance, keeping a pedal in this position, turn away the switch of a kick-down-mode to a contact with a pedal and tighten a counternut. 5. Check up adjustment, having pressed a pedal against the stop in the switch and having checked up a backlash. If the cable cannot be adjusted thus check up adjustment of a cable throttle заслонки, if necessary adjust. After repeat adjustment of a cable of a kick-down-mode.