Bolts of a regulator and hoses (the 4-cylinder engine)
1. A pressure regulator
2. A return hose
|
3. A ring
4. An operating vacuum hose |
Pressure regulator on engine V6
1. A ring
2. A pressure regulator |
3. A return hose
4. Burn down conductings |
Check
Subsection 5.3.3 see.
Replacement
| PERFORMANCE ORDER |
| 1. Execute декомпрессию and disconnect the battery from weight. |
| 2. Disconnect from a regulator a vacuum hose. |
| 3. Disconnect from a regulator a return fuel hose, having pressed it. |
| 4. Turn away bolts of fastening of a regulator of pressure of fuel and remove a regulator. |
| 5. Installation is carried out upside-down. Replace a ring lining. |
|
|