Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
- 6. Transmissions
   + 6.1. A mechanical transmission
   + 6.2. Automatic transmission
   - 6.3. A distributing box
      6.3.1. Specifications
      6.3.2. Epiploons of forward and back flanges
      6.3.3. The box lever
      - 6.3.4. The electromagnetic switch (selector) of a forward axis
         6.3.4.1. The switch on the handle of the lever of a distributing box
         6.3.4.2. Актюатор
         6.3.4.3. The gauge of speed
         6.3.4.4. A control lamp
      6.3.5. Removal and installation of a distributing box
+ 7. Transmission elements
+ 8. Brake system
+ 9. A suspension bracket and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes





6.3.4.2. Актюатор

Check and replacement

PERFORMANCE ORDER
1. Lift the car.
2. Disconnect from актюатора a socket.
3. Check up resistance between conclusions 2 and 3 sockets.
4. Check up resistance between conclusions 2, 3 and weight.
5. If resistance differ from norm. That актюатор replace.
6. Check up work актюатора, запитав from the battery corresponding conclusions through the heater relay under the scheme. At pressure giving through the relay on a conclusion 5 plug актюатора should be involved (the scheme at the left) (the forward bridge is switched off), and at giving of pressure a conclusion 3 plug should be put forward (the forward bridge joins) (the scheme on the right).
7. For check актюатора the main relay of a heater, or similar is used.
8. If актюатор does not work as it is specified above актюатор replace.
The trailer switch актюатора
9. Connect (+) batteries to a conclusion 2, and (-) batteries with a conclusion 3. (+) an ohmmeter conclusion connect to a conclusion 5, and (-) an ohmmeter conclusion – with a conclusion 4. The ohmmeter should show a chain between conclusions 4 and 5.
10. Connect (+) batteries to a conclusion 3, and (-) batteries with a conclusion 2. (+) an ohmmeter conclusion connect to a conclusion 6, and (-) an ohmmeter conclusion – with a conclusion 4. The ohmmeter should show a chain between conclusions 4 and 6.
11. If the switch does not work as is specified above актюатор replace.

On the main page