Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
- 11. Suspension brackets, a steering
   11.2. Technical characteristics
   11.3. The general description of adjustment of wheels
   - 11.4. A forward suspension bracket
      11.4.2. A rack of a forward suspension bracket
      11.4.3. Shock-absorbers of a forward suspension bracket
      11.4.4. The bottom lever of a forward suspension bracket
      11.4.5. The stabilizer of cross-section stability of a forward suspension bracket
      11.4.6. A cross-beam of a forward suspension bracket
   + 11.5. A back suspension bracket
   + 11.6. A steering
   + 11.7. Semiaxes
   11.8. Easily and easy
   11.9. Maintenance service of system of a steering
   11.10. Diagnostics of malfunctions of system of a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice

11.4.6. A cross-beam of a forward suspension bracket Removal

PERFORMANCE ORDER
1. Remove forward wheels.
2. Establish a support under a back part of the engine or use for this purpose the lift.
3. Turn off fixing nuts and remove bolts of fastening of levers to suspension bracket racks.
4. Turn off nuts of fastening of a transmission to a cross-beam.
5. Remove all wires and hoses from a cross-beam.
6. Check up, that nothing disturbed to cross-beam removal.
7. Establish a jack under a cross-beam. Turn off four fixing bolts and remove a cross-beam.

Installation

Installation is spent upside-down removals.


On the main page