Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
- 3.3. Removal and a partition of engines
   + 3.3.2. Technical characteristics
   3.3.3. Repair work, possible without engine dismantle
   + 3.3.4. Major repairs
   3.3.5. Removal and engine installation
   3.3.6. An engine partition
   + 3.3.7. A head of cylinders
   3.3.8. Pistons and rods
   + 3.3.9. A cranked shaft
   3.3.10. An intermediate shaft
   3.3.11. The block of cylinders
   3.3.12. Radical bearings and bearings of rods
   3.3.13. Piston rings
   3.3.14. The first start of the engine after a partition
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice

3.3.14. The first start of the engine after a partition
PERFORMANCE ORDER
1. Without establishing a spark plug, turn a cranked shaft of the engine a starter, the alarm bulb of pressure of oil will not go out yet.
2. Establish spark plugs and connect high voltage wires.
3. Start the engine and warm up it to normal working temperature. Check up the engine on presence of leaks of fuel, oil and cooling liquid.
4. Muffle the engine and check up level of oil and cooling liquid.
5. The first 600 km do not give the big loading on the engine and watch oil level.


On the main page