Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
- 8. Systems of start, ignition
   + 8.1.1. Introduction
   - 8.2. Ignition system (petrol engines)
      + 8.2.1.1. A principle of work PMS
      8.2.2. Technical characteristics
      8.2.3. Check of system of ignition
      8.2.4. The ignition coil
      8.2.5. The ignition distributor
      8.2.6. A corner of an advancing of ignition
      8.2.7. Gauges of system of ignition
      8.2.8. Бегунок the ignition distributor
      8.2.9. Ignition system (6-cylinder engines 2,6 and 2,8)
      8.2.10. Diagnostics of malfunctions of system of injection of gasoline
      8.2.11. That it is necessary to know to the owner of the car with инжекторным the engine
      8.2.12. A turbo the doctor
   + 8.3. System of prestarting heating (diesel engines)
   + 8.4. System of release of the fulfilled gases
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice

8.2.6. A corner of an advancing of ignition

Adjustment

ENGINE ADR

The corner of an advancing of ignition is supervised by the electronic block of management and is not subject to adjustment.

ENGINES AAE, ABK, AAD AND AAR

PERFORMANCE ORDER
1. Warm up the engine.
2. Connect a stroboscope.
3. Switch off all elements of an electric equipment and start the engine.
4. Check up, that the corresponding mark in a flywheel was on one line with a bottom edge of an adjusting window.
5. For carrying out adjustment, turn the ignition distributor as it is necessary.


On the main page