Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
- 8. Systems of start, ignition
   + 8.1.1. Introduction
   - 8.2. Ignition system (petrol engines)
      + 8.2.1.1. A principle of work PMS
      8.2.2. Technical characteristics
      8.2.3. Check of system of ignition
      8.2.4. The ignition coil
      8.2.5. The ignition distributor
      8.2.6. A corner of an advancing of ignition
      8.2.7. Gauges of system of ignition
      8.2.8. Бегунок the ignition distributor
      8.2.9. Ignition system (6-cylinder engines 2,6 and 2,8)
      8.2.10. Diagnostics of malfunctions of system of injection of gasoline
      8.2.11. That it is necessary to know to the owner of the car with инжекторным the engine
      8.2.12. A turbo the doctor
   + 8.3. System of prestarting heating (diesel engines)
   + 8.4. System of release of the fulfilled gases
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice



8.2.7. Gauges of system of ignition

THE GAUGE OF DETONATION COMBUSTION OF FUEL

Removal

PERFORMANCE ORDER
1. Remove a filter from below the engine.
2. Disconnect a socket of connection of the gauge.
3. Turn off a fixing bolt (arrow) and remove the gauge.

Installation

Installation is spent upside-down removals.

THE HALL GAUGE (ENGINES ADR WITH SYSTEM MOTRONIC 3.2

PERFORMANCE ORDER
1. Remove an external casing газораспределительного a belt.
2. Disconnect a socket of connection of the gauge.
3. Turn off fixing bolts and remove the gauge.

Installation

Installation is spent upside-down removals.

THE HALL GAUGE (EXCEPT ENGINES ADR)

On these models the Hall gauge is a part of the distributor of ignition and is not subject to replacement.

On the main page