Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
- 11. A body
   11.1. Removal and installation of the forward buffer
   11.2. Removal and installation of facing of a radiator
   11.3. Removal and cowl installation
   11.4. Adjustment of a cable of the lock of a cowl
   11.5. Replacement локаря
   11.6. A forward wing
   11.7. Replacement молдинга
   11.8. Replacement of a sealant of glass of a door
   11.9. A door upholstery (cars of release till December, 1987)
   11.10. Replacement of glass of a door and window lifterа
   11.11. Removal and door installation
   11.12. The external handle of a door
   11.13. The door lock
   11.14. Adjustment of the lock of a door
   11.15. Removal and installation window lifterа with the electric drive
   11.16. Removal and installation of an external rear-view mirror
   11.17. Replacement of a reflecting element of an external rear-view mirror
   11.18. Repair токообогревательного an element of back glass
   11.19. Removal and installation of the back buffer
   11.20. Removal and installation of a cover of a luggage space
   11.21. Removal and installation of the lock of a cover of a luggage space
   11.22. Replacement of a back decorative overlay with a niche under licence plate
   11.23. Removal and installation of the central console
   11.24. Clearing of drains (on the models equipped with the hatch)
   11.25. Removal and heater installation
+ 12. An electric equipment


https://www.youtube.com/channel/UCoah5uA-uF-j35-MalVTfRQ


11.1. Removal and installation of the forward buffer
THE GENERAL DATA

The top fastening of the buffer

1 – the screw;

2 – the buffer


PERFORMANCE ORDER
1. To remove a decorative overlay (1), cautiously having picked up its screw-driver.
2. To turn out five screws of fastening and to remove a decorative lath, having picked up a screw-driver its ends (1 – a decorative lath; 2 – a screw-driver).
3. To remove radiator facing (subsection 11.2 see).
4. To turn out two screws of fastening and to remove a decorative lattice.
5. To disconnect колодку with wires from antifog headlights.
6. To turn away bolts of the top fastening of the buffer.
7. To turn away bolts of the bottom fastening and to take out forward the buffer, having deduced it from the lateral directing.
8. If necessary to remove bearing plate (1) from the buffer (2). To insert a new bearing plate into the buffer and to latch plastic clips, having made the big effort.
9. To establish the forward buffer upside-down.

On the main page