Audi 100

1982-1990 of release

Repair and car operation



Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
- 11. A body
   11.1. Removal and installation of the forward buffer
   11.2. Removal and installation of facing of a radiator
   11.3. Removal and cowl installation
   11.4. Adjustment of a cable of the lock of a cowl
   11.5. Replacement локаря
   11.6. A forward wing
   11.7. Replacement молдинга
   11.8. Replacement of a sealant of glass of a door
   11.9. A door upholstery (cars of release till December, 1987)
   11.10. Replacement of glass of a door and window lifterа
   11.11. Removal and door installation
   11.12. The external handle of a door
   11.13. The door lock
   11.14. Adjustment of the lock of a door
   11.15. Removal and installation window lifterа with the electric drive
   11.16. Removal and installation of an external rear-view mirror
   11.17. Replacement of a reflecting element of an external rear-view mirror
   11.18. Repair токообогревательного an element of back glass
   11.19. Removal and installation of the back buffer
   11.20. Removal and installation of a cover of a luggage space
   11.21. Removal and installation of the lock of a cover of a luggage space
   11.22. Replacement of a back decorative overlay with a niche under licence plate
   11.23. Removal and installation of the central console
   11.24. Clearing of drains (on the models equipped with the hatch)
   11.25. Removal and heater installation
+ 12. An electric equipment

11.13. The door lock
THE GENERAL DATA

Removal of the lock of a door

 1 – draught;

2 – the plug;

3 – the lock

Blocking drive the lock lever

 1 – приводной the lever;

2 – an assembly aperture;

3 – the lock lever

The mechanism of lock-out of a door
1 – the button of blocking of the lock;
2 – the handle;
3, 5, 8 – шарнирные connections;
4 – lock draught;
6 – draught of the lock;
7 – an adjusting nut;
9 – the door lock;
10 – a bolt;
 11 – consolidation;
12 – the screw with crosswise шлицем;
13 – a cable;
14 – a lock cover;
15 – блокиратор;
16 – a stopper;
17 – draught

Removal

PERFORMANCE ORDER
Models of release till January, 1988
1. To turn out the button of blocking of the lock of a door.
2. To turn away two bolts with internal шестигранником lock fastenings.
3. To pull out it is a little lock on itself and to disconnect draught from the lever of a drive of the lock.
4. To remove the lock.
Models of release since January, 1988
5. To disconnect draughts from lock levers, having wrung out a screw-driver spring holders.
6. To disconnect a cable from the lock lever.
7. To turn away two bolts and to take out the lock from блокиратора.

Installation

PERFORMANCE ORDER
Models of release till January, 1988
1. To establish the lever of a drive of the lock vertically (at an angle 90 ° to the lock case) and to block it by means of a screw-driver through an assembly aperture.
2. To connect bent for to the lever of a drive of the lock.
2. To insert the blocking lever into the plug of draught of blocking.
3. To unblock the drive lever, having taken out a screw-driver.
4. To wrap two bolts of fastening of the lock.
Models of release since January, 1988
5. To put the door lock upside-down removals. If necessary to adjust length of draught by means of an adjusting nut.


On the main page