Audi 100

1982-1990 of release

Repair and car operation

Audi 100
- 1.1. Controls and devices
   + 1.1.1. Models of release till January 1988 г
   + 1.1.2. Models of release since January 1988 г
   1.2. window raiser with the electric drive
   1.3. An external rear-view mirror with the electric drive
   1.4. An internal rear-view mirror
   1.5. A cowl
   1.6. Forward seats with mechanical adjustment
   1.7. Forward seats with the electric drive
   1.8. Transportation of lengthy subjects
   + 1.9. Engine start
   1.10. Safety measures at an engine stop
   1.11. Cruise-control
   1.12. Heating and ventilation
   1.13. The control panel the conditioner
   1.14. The onboard computer
   1.15. Management of the onboard computer on models of release till January, 1988
   1.16. Blocking of the internal handle of the lock of a back door
   1.17. Обкатка the car
   1.18. Car check before departure
   1.19. Replacement of operational liquids and lubricants
   + 1.20. Servicing of cars of release till August, 1985
   + 1.21. Servicing of cars of release since August, 1985
   1.22. Periodicity of greasing of knots of the car
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

1.11. Cruise-control

Command keys the cruise-control

1 – a key of inclusion of the cruise-control;

2 – an input key in "memory" of the set speed;

3 – the lever of switching of the index of turn and light of headlights

The part of cars is equipped by system of the cruise-control which allows to support the constant set speed of movement of the car (over 35 km/h) at the released pedal of an accelerator. Command keys are located by the cruise-control on the lever of the switch of the index of turns and light of headlights. On models with an automatic transmission cruise-control joins only at positions D and 2 levers of the selector.

The prevention

To use the cruise-control it is supposed at long movement on free lines. It is forbidden to use the cruise-control in city streets, in a dense stream, etc.

1. For cruise-control inclusion to move a key 1 in position EIN.
2. After dispersal of the car till demanded speed to press a key 2. Further the set speed is supported automatically and it is possible to clean a foot from an accelerator pedal.
3. At short-term increase in speed (for example, at overtaking) to press an accelerator pedal. After a pedal have released, speed will automatically decrease to the set constant.
4. If it is necessary to increase the set speed of movement, to press a key 2 and to keep it until demanded speed will be reached.
5. By pressing a pedal of a brake or couplings cruise-control is temporarily disconnected. At release pedals the set speed is restored.
6. For cruise-control switching-off to move a key 1 in position AUS. Thus set speed remains in "memory".
7. For restoration of the set speed to move a key 1 in position AUFN.

On the main page