Audi 100

1982-1990 of release

Repair and car operation



Audi 100
- 1.1. Controls and devices
   + 1.1.1. Models of release till January 1988 г
   + 1.1.2. Models of release since January 1988 г
   1.2. window raiser with the electric drive
   1.3. An external rear-view mirror with the electric drive
   1.4. An internal rear-view mirror
   1.5. A cowl
   1.6. Forward seats with mechanical adjustment
   1.7. Forward seats with the electric drive
   1.8. Transportation of lengthy subjects
   + 1.9. Engine start
   1.10. Safety measures at an engine stop
   1.11. Cruise-control
   1.12. Heating and ventilation
   1.13. The control panel the conditioner
   1.14. The onboard computer
   1.15. Management of the onboard computer on models of release till January, 1988
   1.16. Blocking of the internal handle of the lock of a back door
   1.17. Обкатка the car
   1.18. Car check before departure
   1.19. Replacement of operational liquids and lubricants
   + 1.20. Servicing of cars of release till August, 1985
   + 1.21. Servicing of cars of release since August, 1985
   1.22. Periodicity of greasing of knots of the car
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

1.3. An external rear-view mirror with the electric drive
THE GENERAL DATA

The control panel an external rear-view mirror with the electric drive

 1 – джойстик managements of the left mirror;

2 – джойстик managements of the right mirror;

I, II, III, IV – positions джойстика

Джойстики managements of external mirrors are established on an armrest of a door of the driver.

Джойстик 1 operates the left mirror, and джойстик 2 – right.

At moving джойстика in a direction:

I – the reflecting element turns to the left;
II – the reflecting element turns upwards;
III – the reflecting element turns to the right;
IV – the reflecting element turns downwards.

The prevention

At failure of the electric drive position of a reflecting element can be adjusted manually, cautiously pressing on element edge.
On the main page