Audi 100

1982-1990 of release

Repair and car operation




Audi 100
- 1.1. Controls and devices
   + 1.1.1. Models of release till January 1988 г
   + 1.1.2. Models of release since January 1988 г
   1.2. window raiser with the electric drive
   1.3. An external rear-view mirror with the electric drive
   1.4. An internal rear-view mirror
   1.5. A cowl
   1.6. Forward seats with mechanical adjustment
   1.7. Forward seats with the electric drive
   1.8. Transportation of lengthy subjects
   + 1.9. Engine start
   1.10. Safety measures at an engine stop
   1.11. Cruise-control
   1.12. Heating and ventilation
   1.13. The control panel the conditioner
   1.14. The onboard computer
   1.15. Management of the onboard computer on models of release till January, 1988
   1.16. Blocking of the internal handle of the lock of a back door
   1.17. Обкатка the car
   1.18. Car check before departure
   1.19. Replacement of operational liquids and lubricants
   + 1.20. Servicing of cars of release till August, 1985
   + 1.21. Servicing of cars of release since August, 1985
   1.22. Periodicity of greasing of knots of the car
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

1.15. Management of the onboard computer on models of release till January, 1988
THE GENERAL DATA

Command keys the onboard computer on models of release till January 1988 г

1 – a key of switching of functions;

2 – a key of zeroing of the data

The display of the onboard computer on models of release till January 1988 г

1 – the function indicator;

2 – the computer display;

3 – a tachometre;

4 – the function index

For switching of functions to press the top part of a key 1 (the onboard computer Command key fig. see models of release till January 1988). Thus the indicator 1 (the Display of the onboard computer fig. see models of release till January 1988) will show the chosen function. By each pressing of a key function following one after another joins. By pressing the bottom part of a key 1 (the onboard computer Command key fig. see models of release till January 1988) electronic clock join. By pressing a key 2 Reset during more 2 with there is a zeroing of the data of the chosen function in "memory" of the computer.

Computer functions

Computer functions are similar to computer functions on models of release since January, 1988 except that instead of function «quantity of the spent fuel» function "electronic clock" is established.

Electronic clock

Shows current time. For inclusion of the given function to press the bottom part of a key 1 (the onboard computer Command key fig. see models of release till January 1988). At deenergizing of ignition the computer is automatically switched to the given function about any another which is restored at the subsequent inclusion of ignition. For transfer of hours to press the bottom part of a key 1 and to keep it until indication of minutes will start to blink. Then to press a key 2 Reset for transfer of minutes. By each short-term pressing there is a transfer into one minute. If to keep a key 2 Reset in the pressed condition, transfer of minutes occurs faster. Again to press the bottom part of a key 1 and to keep it until indication of hours will start to blink. To put clock to similarly minutes. After time transfer to press the top part of a key 1.


On the main page