Audi 100

1982-1990 of release

Repair and car operation

Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
- 7. Transmission
   + 7.1. Coupling
   + 7.2. A mechanical drive of deenergizing of coupling
   - 7.3. A hydraulic drive
      7.3.1. The main cylinder of a drive of coupling
      7.3.2. The working cylinder of a drive of coupling
      7.3.3. The bearing of deenergizing of coupling (model of release after 1988)
      7.3.4. Prorolling of system of a drive of deenergizing of coupling
   + 7.4. A transmission
   + 7.5. A drive of forward wheels
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

7.3.2. The working cylinder of a drive of coupling
Removal

PERFORMANCE ORDER

1. To disconnect a hose (fig. Coupling with a hydraulic drive) from the working cylinder see and to muffle a hose aperture.

2. To beat out a lock pin and to take out the working cylinder from картера couplings.

Dismantling and assemblage

PERFORMANCE ORDER

1. To remove a lock ring (fig. Coupling with a hydraulic drive see) and to take out a pusher from the cylinder case.

2. To remove грязезащитный a cover.

3. To take out the piston and a spring from the cylinder case.

4. To remove a protective cap from the prorolling valve, and then to turn out the valve from the cylinder case.

5. To remove a cuff from the piston.

6. To wash out details a pure brake liquid and to wipe dry.

7. To collect the working cylinder of a drive of coupling upside-down. Thus the cuff needs to be focused a working edge towards a spring, having greased with its preliminary pure brake liquid.

Installation

PERFORMANCE ORDER

To establish the working cylinder of a drive of coupling upside-down. After installation to pump over a coupling hydrodrive (subsection 7.3.4 see).

On the main page