Audi 100

1982-1990 of release

Repair and car operation

7.3.3. The bearing of deenergizing of coupling (model of release after 1988)

THE GENERAL DATA

The device of a plug of deenergizing of coupling on models since 1988

1 – картер couplings; 2 – a spherical finger; 3 – the holder; 4 – a washer; 5 – a sealing ring;

6 – an epiploon; 7 – the directing plug; 8 – a spring clip; 9 – a plug of deenergizing of coupling; 10 – the bearing of deenergizing of coupling

Replacement

PERFORMANCE ORDER

1. To remove a transmission. 2. To remove by means of a screw-driver a spring clip of fastening of the holder to a spherical finger. 3. To remove a plug of deenergizing of coupling with the bearing from the directing plug. 4. To remove the holder from a plug. 5. To take out the bearing from a plug. 6. To insert a finger of the holder into a plug. 7. To grease basic surfaces of a plug with graphite greasing and to establish a plug on directing plug. Thus the holder to establish on a spherical finger. 8. To establish a spring clip, having fixed the holder on a spherical finger. 9. To get the bearing of deenergizing of coupling in a plug at an angle 45 °. Then to establish it on the directing plug.