Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
- 7. Transmission
   + 7.1. Coupling
   + 7.2. A mechanical drive of deenergizing of coupling
   + 7.3. A hydraulic drive
   - 7.4. A transmission
      + 7.4.1. Type 014 four-speed transmission
      + 7.4.2. A five-speed transmission of type 013 or 093
      + 7.4.3. A five-speed transmission of types 016 and 012
      - 7.4.4. The mechanism of management of gear change КП of type 016
         7.4.4.1. Removal and installation of the lever of a gear change (type I)
         7.4.4.2. Removal and installation of the lever of a gear change (type II)
         7.4.4.3. Dismantling of the lever of a gear change
         7.4.4.4. Assemblage of the lever of a gear change
         7.4.4.5. Adjustment of the mechanism of management by a gear change
      + 7.4.5. An automatic transmission
   + 7.5. A drive of forward wheels
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

7.4.4.5. Adjustment of the mechanism of management by a gear change
PERFORMANCE ORDER
1. To weaken an inhaling of a nut 14 (cм. Fig. Draught of the mechanism of a gear change (type II)) клеммного connections of forward and back draughts of management by a gear change.
2. To remove the handle of the lever 8 (fig. (the Mechanism of management of a gear change (type I see)) and a casing 7.
3. To establish the gear change lever vertically on a line of inclusion of 3rd and 4th transfers.
4. To tighten клеммное connection by a bolt 12 (cм. Fig. Draught of the mechanism of a gear change (type II)) and a nut 14, thus the lever 2 switches of transfers should be in neutral position.
5. To include 1st transfer.
6. Дожать the gear change lever to the left against the stop.
7. To release the lever. It should come back to 5–10 mm.
8. To include 5th transfer.
9. Дожать the gear change lever to the right against the stop.
10. To release the lever. It should come back to 5–10 mm.
11. If lever moving does not keep within the specified ranges, it is necessary to spend adjustment. It can achieve moving of an arm 23 (cм. Fig. the gear change Lever (type II)) to the right or to the left.
12. To check up clearness of switching of all transfers.


On the main page