Audi 100

1982-1990 of release

Repair and car operation



Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
- 7. Transmission
   + 7.1. Coupling
   + 7.2. A mechanical drive of deenergizing of coupling
   + 7.3. A hydraulic drive
   + 7.4. A transmission
   - 7.5. A drive of forward wheels
      7.5.1. Полуось
      7.5.2. The internal hinge of equal angular speeds (SHRUS)
      7.5.3. The external hinge of equal angular speeds (SHRUS)
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

7.5.3. The external hinge of equal angular speeds (SHRUS)

Removal

PERFORMANCE ORDER
1. To remove полуось from the car (subsection 7.5 see).
2. To remove coupling collars 8 and to shift from the case of the external hinge грязезащитный a cover 11.
3. To unclench for short moustaches a lock ring 10 and to press from a semiaxis an external SHRUS, making effort a holder.
4. To remove грязезащитный a cover 11.

Installation

PERFORMANCE ORDER
1. To remove old lubricant.
2. To put in the hinge 90 г (models with 4-cylinder engines) or 120 г (models with 5-cylinder engines) консистентной type greasings «G6» or domestic greasing ШРУС-4.
3. To establish on полуось грязезащитный a cover 11.
4. Напрессовать the hinge in gathering on полуось so that the lock ring 10 was latched in a semiaxis flute.
5. To establish new collars 8 and to press out on them locks.
6. To establish полуось on the car.


On the main page