Audi 80/Avant (B4)

Since 1991-1995 of release

Repair and car operation

Audi 80/Avant
+ The description
+ Engines
+ System of release of the fulfilled gases
+ Cooling system
+ Fuel tank and the fuel pump
+ The air filter and воздухозаборные channels
+ Injection system
+ Coupling
+ Transmission and transmission
+ Suspension bracket and steering
+ Brake system
+ Antiblocking system of brakes
+ Wheels and tyres
+ Kuzovnaja electrosystem
+ Ignition system
- Illumination
   Illumination check
   Spare lamps
   Replacement of lamps
   Removal of headlights
   Check of adjustment of headlights
   Antifog headlights
   Independent installation of antifog headlights
   Indexes of turns
   Back lanterns
   Illumination of licence plates
   Other lighting devices
   Illumination of the instrument panel
+ Signalling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ Body elements
+ Search of malfunctions
+ Specifications

Independent installation of antifog headlights

Models with 4 and 5-cylinder engines

Antifog headlights from shop of spare parts look on streamline body Audi 80 not so well, except that, they are difficultly reliable for establishing on corresponding places. Therefore it is necessary to establish original antifog headlights, and it means that it will be necessary to replace the bumper panel on having apertures for installation of antifog headlights. In addition it be required to you to the relay of antifog headlights and the original switch for the instrument panel. Probably, it is necessary to put near to the panel of switches narrower shelf (also an original detail). Installation needs to be made in this case as follows:

PERFORMANCE ORDER

To remove forward panels of a bumper (the head body Elements).
Below in an aperture for installation of antifog headlights tips of already laid connecting wires are fixed.
To connect wires, to insert antifog headlights.
To establish forward panels with apertures for antifog headlights.
In the central switchboard to replace the wire bridge on штекерной to a cell of the relay 1 with the relay of antifog headlights.
Заглушку in a control panel to replace with the original switch of antifog headlights (the head Devices and auxiliary devices).
Probably, narrower shelf, depending on quantity of already available switches is required to you.
It is necessary to lay still a wire from the switch to штекерной to station (on the additional block of the relay at the left under the instrument panel). In case of doubts concerning colour of a wire – be verified on section Electric schemes.
To include. To check up functioning in addition to lay, near or to a headlight. It is ready.

On the main page