Audi 80/Avant
+ The description
- Engines
Basic elements
Greasing system
Ventilation картера
Visual check of the engine
Обкатка the new engine
Engine service life
Nominal and maximum frequency of rotation
Restriction of frequency of rotation
Measurement of pressure of compression
The list of malfunctions
Проворачивание the engine
Hydraulic pushers
Works on gear belt ГРМ
The list of malfunctions
Removal and installation of a head of the block of cylinders
Removal and engine installation
+ System of release of the fulfilled gases
+ Cooling system
+ Fuel tank and the fuel pump
+ The air filter and воздухозаборные channels
+ Injection system
+ Coupling
+ Transmission and transmission
+ Suspension bracket and steering
+ Brake system
+ Antiblocking system of brakes
+ Wheels and tyres
+ Kuzovnaja electrosystem
+ Ignition system
+ Illumination
+ Signalling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ Body elements
+ Search of malfunctions
+ Specifications
|
Visual check of the engine
|
|
- Examine the engine from above and from below.
- Places poorly soiled by oil is not an occasion to the anxiety, all engines «выпотевают» from time to time a small amount of lubricant means.
- However you should find out the reason of occurrence of oil stains under the parked car and a considerable oil dirt on the engine case.
- To clear the engine means for clearing of the engine or the steam-ejecting device.
- After a trial trip (enough several kilometres) to check, oil whence acts.
|
|
Possible places of leak
We have made the short list of places in which at engine Audi oil can act:
- Sealing linings of a cranked shaft, camshaft (ов) and an intermediate shaft (the 4-cylinder engine). These places are closed by a casing of a gear belt
- Sealing linings of a cover of a head of the block of cylinders.
- Sealing lining of a head of the block of cylinders.
- Sealing lining of the distributor of ignition (model with 4 and 5-cylinder engines).
- Switches with a hydrodrive.
- Sealing lining of the oil filter.
- Sealing lining of fastening of the oil filter (model with 4-cylinder engines).
- Sealing lining of the oil pallet.
- Sealing lining of a cranked shaft behind (oil acts on a dividing arch the transmission engine/case).
|
|
The help: it is possible to spend an engine sink in so-called harvest parks in which it is possible to use the steam-ejecting device for self-service. At strong pollution it is recommended to sprinkle a little before a sink on the engine means for clearing and to leave it to operate during any time. Necessarily take with itself working clothes.
|
|
On the main page
|