Opel Kadett E

1984-1991 of release

Repair and car operation


Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
- 7. Start and gymnastics system
   7.1. A technical characteristics
   7.2. A finding of malfunctions in electric chains
   + 7.3. The accumulator
   + 7.4. The generator
   - 7.5. A starter
      7.5.1. Check of system of start of the engine
      7.5.2. Removal and starter installation
      7.5.3. Check and starter repair
   7.6. Replacement of the lock of ignition
   7.7. Removal and installation of the gauge of pressure of oil
   7.8. Removal and installation of the gauge of level of oil on models with 16th valves
   + 7.9. The electric equipment of diesel engines 16D, 16DA, 17D and 17DR
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes

7.5.2. Removal and starter installation

Removal

PERFORMANCE ORDER
1. Remove a wire of weight from the accumulator.
L models 1,2
2. Disconnect positive wires from the accumulator and a starter. Also disconnect a positive wire from the generator.
3. For access improvement disconnect draught of a gear change. Unscrew bolts and remove a starter, thus disconnect wires from the traction relay.
4. At installation of a new starter rearrange on it the traction relay.

Models 1,4, 1,6, 1,8 and 2,0 with 8th valves
5. Lift a forward part of the car and fix on supports.
6. Mark, then disconnect electric wires from the traction relay.
7. Unscrew bolts (fastenings of a starter are specified by arrows) and take it from under the car.
Models 2,0 of l with 16th valves
8. Unscrew bolts, fastening a starter and a transmission to the engine.
9. Lift a forward part of the car and fix on supports. Remove a support of support of an inlet collector.
10. Disconnect electric wires from a starter.
11. Unscrew the remained bolts of fastening of a starter, remove a starter from the engine and take it from under the car.

Installation

Installation is made in sequence, return to removal.


On the main page