Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
- 9. Coupling
   9.1. A technical characteristics
   + 9.2. A coupling cable
   9.3. Removal and installation of a pedal of coupling
   + 9.4. Coupling
   9.5. Removal and installation выжимного the bearing
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes

9. Coupling
THE GENERAL DATA

Coupling

1 – a disk of coupling,
2 – a leading part of coupling
With a press disk,
3 – a bolt,
4 – выжимной the bearing,
5 – the lever of deenergizing of coupling,
6 – the directing plug,
7 – a plug of deenergizing of coupling,
8 – a protective plate

Coupling is intended for short-term separation of the engine and transmission at a gear change or braking and their smooth connection at трогании the car from a place, and also for protection of details of transmission from dynamic loadings.

Coupling consists of a disk of the coupling, a leading part of coupling with a press disk and the mechanism of deenergizing of coupling.

The coupling disk is established between a flywheel and a press disk of coupling and moves on шлицам a primary shaft of a transmission.

The leading knot of coupling is screwed by bolts on a flywheel. The twisting moment at engine work is transferred from a cranked shaft through a flywheel and a disk of coupling which is clamped between a flywheel and a press disk, to a primary shaft of a transmission.

To disconnect the engine from a transmission, it is necessary to take away выжимной a disk from a coupling disk. It is reached by use тросового a drive. The plug of deenergizing of coupling moves выжимной the bearing which influences a spring выжимного a disk and takes away press a disk from a coupling disk. Such design of coupling allows to replace a coupling disk, выжимной the bearing and a sealing ring of the directing plug without removal of the engine or a transmission from the car.


On the main page