Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
- 13. A body
   13.1. A technical characteristics
   13.2. Care of a body
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   + 13.5. A cowl
   13.6. Removal and installation of forward furnish of the car
   13.7. Removal and installation of back furnish of the car
   13.8. Removal and installation of a forward wing
   13.9. Removal and installation обтекателя a windscreen
   + 13.10. Doors
   13.11. Removal and installation of a cover of a luggage carrier and торсионов
   13.12. Replacement of components of the lock of a cover of a luggage carrier
   13.13. A windscreen
   13.14. Removal and installation of back slightly opened glass
   13.15. Replacement of consolidation of back slightly opened glass
   13.16. Replacement of an external rear-view mirror
   + 13.17. Seats
   13.18. Removal and installation of headrests
   13.19. Removal of furnish of a luggage space
   13.20. Removal and installation of the central console
   13.21. Removal and installation of a ware box
   13.22. Replacement of seat belts
   13.23. Check and hatch service
   + 13.24. The electric equipment of a body
+ 14. Electric schemes

13. A body
THE GENERAL DATA

The car has bearing body.

The body is made of the stamped and welded details, including zones смятия in forward and back parts and a rigid central part.

Security measures at carrying out of welding works

At carrying out of the welding and other works connected with strong искровыделением, nearby from the accumulator location, necessarily remove the accumulator.

It is forbidden to spend welding both a firm and soft soldering of details of the filled conditioner. It concerns and those elements of the car which welding can cause a warming up of details of the conditioner. At carrying out of repair-painting works in сушильной or in its zone of a warming up the temperature should not exceed the furnace +80 ° With.


On the main page