Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation

Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
- 6. Transmissions
   + 6.1. A mechanical transmission
   - 6.2. Automatic transmission
      6.2.1. Specifications
      6.2.2. Transmission diagnostics
      6.2.3. A drive cable заслонки
      6.2.4. Draught of transmission
      6.2.5. The blocking switch
      6.2.6. System of fixing of transfers
      6.2.7. The lever of change of transfers
      6.2.8. Removal and transmission installation
   + 6.3. A distributing box
+ 7. Transmission elements
+ 8. Brake system
+ 9. A suspension bracket and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes

6.2.4. Draught of transmission
Adjustment

PERFORMANCE ORDER

1. Translate the selector in all positions, clamp operation thus should be felt. If operation is not felt, or the index does not coincide with designations draught is necessary for adjusting.

2. Lift the car.

3. Release a nut of fastening of bent for to the selector (2) (1 – neutral position).

4. Displace the lever (the bottom part of the selector) clockwise against the stop, then displace back on 2 clicks. Establish the selector in position N.

5. Tighten a nut with the set moment.

6. Adjust blocking switch (subsection 6.2.5 see).

7. Check up adjustment. The selector should be fixed in all positions, and the engine should be started only in positions P or N. If necessary repeat adjustment.

On the main page