Toyota 4 Runner/Hilux/Surf

1987-1998 of release

Repair and car operation



Тойота 4Раннер
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 4. Systems of heating, ventilation
+ 5. Fuel and exhaust systems
- 6. Transmissions
   + 6.1. A mechanical transmission
   - 6.2. Automatic transmission
      6.2.1. Specifications
      6.2.2. Transmission diagnostics
      6.2.3. A drive cable заслонки
      6.2.4. Draught of transmission
      6.2.5. The blocking switch
      6.2.6. System of fixing of transfers
      6.2.7. The lever of change of transfers
      6.2.8. Removal and transmission installation
   + 6.3. A distributing box
+ 7. Transmission elements
+ 8. Brake system
+ 9. A suspension bracket and a steering
+ 10. A body
+ 11. An electric equipment
+ 12. Electroschemes





6.2.5. The blocking switch
THE GENERAL DATA

The switch blocks engine start in all positions of the selector except P and N. Check or switch replacement Otherwise is required.

Check

PERFORMANCE ORDER
1. Lift the car.
2. Disconnect from the switch a socket.
3. At the switched off ignition check up resistance between switch conclusions (the Resistance tab. between switch conclusions see). If necessary adjust the switch or replace.

Adjustment

PERFORMANCE ORDER
1. Translate the selector in position N.
2. Release a bolt of the switch (2) and adjust position, for this purpose release a bolt, insert a flute (3) in the area of a neutral (1) and, keeping the switch, tighten a bolt.
3. For switch replacement расконтрите a washer also turn away a nut.
4. Turn away a bolt and remove the switch.
5. Assemblage is carried out upside-down. Adjust the switch.

Resistance between switch conclusions

Selector position
Normally closed conclusions
Normally closed conclusions
P
4 – 7
5 – 6
R
4 – 8
N
4 – 10
5 – 9
D
4 – 9
2
2 – 4
L
2 – 3

On the main page