Audi 100/A6
1990-1997 of release
Repair and car operation
Audi 100/A6
+
1. The maintenance instruction
+
2. Maintenance service
+
3. Engines
+
3.2. Diesel engines
+
3.3. Removal and a partition of engines
+
4. Cooling system
+
5. Heating and ventilation
+
6. Fuel system
+
7. An exhaust system
+
8. Systems of start, ignition
+
9. Transmission
+
10. Brake system
-
11. Suspension brackets, a steering
11.2. Technical characteristics
11.3. The general description of adjustment of wheels
+
11.4. A forward suspension bracket
-
11.5. A back suspension bracket
11.5.2. Bearings of a nave of a back wheel
11.5.3. A pin of a back wheel
11.5.4. A rack of a back suspension bracket
11.5.5. Cross-section draught of a back suspension bracket
11.5.6. The stabilizer of cross-section stability of a back suspension bracket
11.5.7. A cross-beam of a back suspension bracket
11.5.8. System of adjustment of height of a back suspension bracket
11.5.9. Elements of system of adjustment of height of a back suspension bracket
+
11.6. A steering
+
11.7. Semiaxes
11.8. Easily and easy
11.9. Maintenance service of system of a steering
11.10. Diagnostics of malfunctions of system of a steering
+
12. A body
+
13. An electric equipment
+
14. A good advice
11.5.3. A pin of a back wheel
Removal
MODELS WITH BACK DRUM-TYPE BRAKES
PERFORMANCE ORDER
1.
Remove a corresponding wheel.
2.
Remove a brake drum.
3.
Disconnect a brake tube from the wheel cylinder.
4.
Turn off fixing bolts and remove a guard of a brake from a pin. Remove a pin.
MODELS WITH BACK DISK BRAKES
PERFORMANCE ORDER
1.
Remove a nave.
2.
Turn off fixing bolts (are specified by arrows).
3.
Remove a guard and a pin from the car.
Installation
Installation is spent upside-down removals.
On the main page