Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
- 11. Suspension brackets, a steering
11.2. Technical characteristics
11.3. The general description of adjustment of wheels
+ 11.4. A forward suspension bracket
- 11.5. A back suspension bracket
11.5.2. Bearings of a nave of a back wheel
11.5.3. A pin of a back wheel
11.5.4. A rack of a back suspension bracket
11.5.5. Cross-section draught of a back suspension bracket
11.5.6. The stabilizer of cross-section stability of a back suspension bracket
11.5.7. A cross-beam of a back suspension bracket
11.5.8. System of adjustment of height of a back suspension bracket
11.5.9. Elements of system of adjustment of height of a back suspension bracket
+ 11.6. A steering
+ 11.7. Semiaxes
11.8. Easily and easy
11.9. Maintenance service of system of a steering
11.10. Diagnostics of malfunctions of system of a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice
|
This system serves for maintenance of constant height of a back suspension bracket irrespective of car loading. It consists of the modified shock-absorbers of a back suspension bracket, accumulators, the adjusting valve, a tank and connecting tubes. Hydraulic pressure is created by the pump of system of the hydraulic booster of a steering. |
On the main page
|