Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
- 11. Suspension brackets, a steering
   11.2. Technical characteristics
   11.3. The general description of adjustment of wheels
   + 11.4. A forward suspension bracket
   + 11.5. A back suspension bracket
   - 11.6. A steering
      11.6.2. A steering column
      11.6.3. The lock of ignition / the lock of a steering column
      11.6.4. The steering mechanism
      11.6.5. Пыльники the steering mechanism
      11.6.6. System of the hydraulic booster of a steering
      11.6.7. The pump of system of the hydraulic booster of a steering
      11.6.8. The spherical hinge of steering draught
      11.6.9. Steering draught
   + 11.7. Semiaxes
   11.8. Easily and easy
   11.9. Maintenance service of system of a steering
   11.10. Diagnostics of malfunctions of system of a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice



11.6.2. A steering column Removal

PERFORMANCE ORDER
1. Remove a steering wheel.
2. Remove a cover, turn off fixing nuts and remove wires of the combined switches.
3. Remove an instrument guard and a shelf.
4. Disconnect a connection socket (it is specified by an arrow) from the switch of the lock of ignition and remove wires from a steering column.
5. Unbend the panel of furnish and mark position of installation of the universal hinge of a steering column in relation to a shaft of the steering mechanism. Then turn off a coupling bolt (it is specified by an arrow) and a nut.
6. Turn off a fixing bolt of a casing of the lock of ignition.
7. Turn off nuts and remove fixing bolts of a steering column (are specified by arrows). Remove a steering column.
8. Remove a casing, turn off nuts of the top fastening (two nuts are specified by arrows) and remove a rack from the car.

Installation

Installation is spent upside-down removals.

On the main page