Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
- 3. Engines
+ 3.1.1.2. Technical characteristics
- 3.1.2. 5-cylinder engines
3.1.2.2. Technical characteristics
3.1.2.3. Sinhronizatsionnye labels timing
3.1.2.4. Compression check
3.1.2.5. A gazoraspredelitelnyj belt
3.1.2.6. Натяжитель газораспределительного a belt, an asterisk
3.1.2.7. Additional приводной a belt
3.1.2.8. A camshaft cover
3.1.2.9. A camshaft epiploon
3.1.2.10. Epiploons of a cranked shaft
3.1.2.11. A head of cylinders
3.1.2.12. Hydraulic pushers
3.1.2.13. A flywheel
3.1.2.14. Engine fastenings
3.1.2.15. The oil pallet
3.1.2.16. The oil pump and маслозаборный a branch pipe
+ 3.1.3. 6-cylinder engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice
|
Removal
| PERFORMANCE ORDER |
| 1. Disconnect a wire of the minus plug of the accumulator. |
|
НАТЯЖИТЕЛЬ
| PERFORMANCE ORDER |
| 2. Remove газораспределительный a belt. |
| 3. Unscrew bolts and remove натяжитель. |
|
CAMSHAFT ASTERISK
| PERFORMANCE ORDER |
| 4. Remove газораспределительный a belt. |
| 5. Unscrew a bolt of an asterisk of a camshaft and remove an asterisk. |
|
ASTERISK OF THE CRANKED SHAFT
| PERFORMANCE ORDER |
| 6. Remove газораспределительный a belt. |
| 7. Unscrew a bolt of an asterisk of a cranked shaft and remove an asterisk. |
|
Check
| PERFORMANCE ORDER |
| 1. Clean asterisks and examine them on presence of deterioration and damages. |
| 2. Examine натяжитель on presence of deterioration and damages, if necessary replace it. |
|
Installation
Installation of all details is spent upside-down removals.
|
On the main page
|