Audi 100/A6
1990-1997 of release
Repair and car operation
Audi 100/A6
+
1. The maintenance instruction
+
2. Maintenance service
+
3. Engines
+
3.2. Diesel engines
+
3.3. Removal and a partition of engines
+
4. Cooling system
+
5. Heating and ventilation
-
6. Fuel system
+
6.1.2. Technical characteristics
-
6.2. Multidot system of injection of fuel
6.2.2. Technical characteristics
6.2.3. The air filter
6.2.4. An accelerator rope
6.2.5. Elements of system of injection of fuel Motronic/Jetronic
6.2.6. Elements of system of injection of fuel Digifant
6.2.7. The fuel filter
6.2.8. The fuel pump and the gauge of level of fuel
6.2.9. A fuel tank
6.2.10. Release of pressure from system of injection of fuel
6.2.11. An inlet collector
6.2.12. Check of system of injection of fuel
6.2.13. Neetilirovannyj gasoline
+
6.3. System of injection MPI/MPFI (6-cylinder engines)
+
6.4. The power supply system of diesel engines
6.5. The device of service of heating
6.6. Diagnostics of malfunctions of system of heating
6.7. The conditioner: not only "pluses", but also "minuses"
6.8. Rules of service of the conditioner
+
7. An exhaust system
+
8. Systems of start, ignition
+
9. Transmission
+
10. Brake system
+
11. Suspension brackets, a steering
+
12. A body
+
13. An electric equipment
+
14. A good advice
6.2.10. Release of pressure from system of injection of fuel
PERFORMANCE ORDER
1.
Remove the relay or a safety lock of the fuel pump and scroll a cranked shaft of the engine a starter within several seconds for pressure release.
2.
Accurately disconnect any of tubes of the power supply system and definitively let out pressure.
On the main page