Audi 100/A6

1990-1997 of release

Repair and car operation



Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
- 6. Fuel system
   + 6.1.2. Technical characteristics
   - 6.2. Multidot system of injection of fuel
      6.2.2. Technical characteristics
      6.2.3. The air filter
      6.2.4. An accelerator rope
      6.2.5. Elements of system of injection of fuel Motronic/Jetronic
      6.2.6. Elements of system of injection of fuel Digifant
      6.2.7. The fuel filter
      6.2.8. The fuel pump and the gauge of level of fuel
      6.2.9. A fuel tank
      6.2.10. Release of pressure from system of injection of fuel
      6.2.11. An inlet collector
      6.2.12. Check of system of injection of fuel
      6.2.13. Neetilirovannyj gasoline
   + 6.3. System of injection MPI/MPFI (6-cylinder engines)
   + 6.4. The power supply system of diesel engines
   6.5. The device of service of heating
   6.6. Diagnostics of malfunctions of system of heating
   6.7. The conditioner: not only "pluses", but also "minuses"
   6.8. Rules of service of the conditioner
+ 7. An exhaust system
+ 8. Systems of start, ignition
+ 9. Transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice


https://www.youtube.com/channel/UCoah5uA-uF-j35-MalVTfRQ


6.2.9. A fuel tank

THE GENERAL DATA

Elements of a fuel tank on models with engine ADR coding

1. A tube of giving of fuel
2. A hose going to the coal filter
3. The return pipeline
4. A perepusknaja tube
5. A tube of a jellied mouth
6. An insert
7. A clip
8. A fuel tank
9. A connection bolt банджо
10. A fixing ring
11. The gauge of level of fuel
12. The fuel pump

Elements of a fuel tank on models with engine AAD coding

1. A connection bolt банджо
2. Copper washers
3. A fixing ring
4. The gauge of level of fuel
5. A sealing ring
6. A clip
7. The pressure chamber
8. The fuel pump
9. The return pipeline
10. A fuel tank
11. Dempfernye linings
12. Шлинг a jellied mouth
13. A clip
14. An insert
15. A tube of a jellied mouth
16. A perepusknaja tube
17. The return pipeline
18. A protective hose
19. The ventilation valve
20. A ventilating tube
21. A tube of giving of fuel

Removal

PERFORMANCE ORDER
1. Disconnect a socket of connection and hoses from the pump / of the gauge of level of fuel.
2. Establish a jack under a fuel tank.
3. Disconnect a hose of a jellied mouth from a fuel tank.
4. Turn off nuts of fixing strips of a fuel tank and remove a fuel tank.

Installation

Installation is spent upside-down removals.
On the main page