Audi 100/A6

1990-1997 of release

Repair and car operation

Audi 100/A6
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. Engines
+ 3.2. Diesel engines
+ 3.3. Removal and a partition of engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Systems of start, ignition
- 9. Transmission
   + 9.1.2. Technical characteristics
   - 9.2. A Mehnichesky transmission
      + 9.2.2. Technical characteristics
      9.2.3. The gear change mechanism
      9.2.4. Removal and installation manual transmission
      9.2.5. Partition manual transmission
      9.2.6. The multipurpose switch and the switch of lanterns of a backing
      9.2.7. The speedometer gauge
      9.2.8. Epiploons
      9.2.9. Evident repair of a transmission 012
   + 9.3. An automatic transmission
+ 10. Brake system
+ 11. Suspension brackets, a steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice

9.2. A Mehnichesky transmission

9.2.1. Introduction

THE GENERAL DATA

The mechanism of a gear change 012

1. The handle
2. The plug
3. A framework
4. A cover
5. A bolt
6. The plug
7. A ring
8. A lock ring
9. The raspornaja plug
10. A spring
11. A spherical emphasis
12. A spring
13. The plug
14. The gear change lever
15. A nut
16. A lamellar spring
17. A connector
18. A tube
19. A lock ring
20. A casing of a spherical emphasis
21. Fastening of the mechanism of a gear change
22. A nut
23. A strengthening plate
24. A nut
25. A bolt
26. A back switching rod
27. A rubber cover
28. A switching rod and universal connection
29. A clip
30. A bolt
31. A bolt

Universal connection of a switching rod (012)

The gear change mechanism 01Е

1. The connecting lever
2. A rod
3. A switching rod
4. An emphasis
5. The gear change lever
6. A support of the lever of switching
7. The switching lever on a transmission

The gear change mechanism 01Е

1. The gear change lever
2. A back switching pusher
3. The rubber plug
4. An emphasis
5. Semicircular loose leaves
6. A spring
7. An intermediate plate
8. The switching lever
9. A rubber cover
10. A back switching rod
11. A nut
12. A raspornaja sleeve
13. Directing
14. A spring
15. The raspornaja plug
16. A lock clip
17. A bolt
18. The left and right shock-absorbers
19. The top emphasis
20. A nut
21. The bottom emphasis
22. An arm

The transmission is fixed in a back part of the engine and has five transfers of a forward course and one transfer of a backing, the synchronisation mechanism is established on all transfers forward and a backing.

In a transmission 012 lever of a gear change is connected to a transmission one switching draught, and in a transmission 01Е two switching draughts.

On the main page