Audi 100

1982-1990 of release

Repair and car operation

Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
- 12. An electric equipment
   - 12.1. Electric equipment system
      12.1.1. A technical characteristics
      12.1.2. Safety locks, the relay and management blocks
      - 12.1.3. The generator Removal and generator installation Dismantling and generator assemblage Check, survey and дефектовка generator details Adjustment of a tension of a belt of a drive of the generator
      + 12.1.4. A starter
      + 12.1.5. Illumination and the light alarm system
   + 12.2. Ignition system
   + 12.3. Electric schemes Dismantling and generator assemblage
1. To clear the generator of a dirt and a dust.
2. To turn out screws of fastening and to remove a regulator напряжениясо щеткодержателем.
3. To turn away coupling bolts and to uncover the generator from outside a drive with a rotor.
4. To clamp slightly a rotor for polar tips in a vice and to turn away a nut of fastening of a pulley.
5. To remove a washer, a pulley and the fan with linings. To take out шпонку from a rotor shaft.
6. Выпрессовать a rotor from a generator cover.
7. To turn away bolts and to uncover the bearing.
8. Выпрессовать the bearing from a generator cover.
9. To press the bearing from a rotor shaft.
10. To turn out the screw and to remove the condenser.
11. To turn out nuts and to remove washers, linings and an insulator.
12. To turn out three screws of fastening of conclusions of a winding статора to выпрямительному to the block and to remove статор from a cover.
13. To turn out screws and to take out выпрямительный the block from a cover.
14. To collect the generator upside-down.

On the main page