| 1. To mark the screen definitely, thus a line of the centres of headlights M to put on the screen on distance h, equal to height of an arrangement of the centres of headlights over floor level. h it is necessary to measure distance on the equipped car with the additional weight equal of 70 kg, on the middle of a back seat. The fuel tank should be filled. |
| 2. Distance Х from the centre of a headlight to the car middle is measured on the car. |
| 3. To check up and if necessary to finish to нормированного pressure in tyres. |
| 4. To establish the car on a horizontal platform perpendicularly to the screen on distance of 10 m. Thus a longitudinal plane of symmetry of the car should pass in the area of 0 on the screen. |
| 5. On models with the electroproof-reader of light of headlights to establish the handle of the proof-reader in position «0». |
| 6. To include a passing light. |
| 7. A direction of a light stain to regulate for each headlight separately. Other headlight during adjustment to close an opaque material. |
|
8. To extend upwards the button of blocking (1) located on a headlight. |
| 9. To adjust screws (in horizontal and in a vertical plane) manual adjustment of a beam of light position of a light stain for each headlight on the screen, if an arrangement of light stains to the necessary. |
| 10. Headlights are considered adjusted when the top borders of the left parts of light stains coincide with line N, and vertical lines And and In pass through points С1 and С2 crossings of horizontal and inclined sites of light stains. |