Audi 100

1982-1990 of release

Repair and car operation




Audi 100
- 1.1. Controls and devices
   + 1.1.1. Models of release till January 1988 г
   + 1.1.2. Models of release since January 1988 г
   1.2. window raiser with the electric drive
   1.3. An external rear-view mirror with the electric drive
   1.4. An internal rear-view mirror
   1.5. A cowl
   1.6. Forward seats with mechanical adjustment
   1.7. Forward seats with the electric drive
   1.8. Transportation of lengthy subjects
   - 1.9. Engine start
      1.9.1. The carburettor engine
      1.9.2. The engine with system of injection of fuel
      1.9.3. The diesel engine
   1.10. Safety measures at an engine stop
   1.11. Cruise-control
   1.12. Heating and ventilation
   1.13. The control panel the conditioner
   1.14. The onboard computer
   1.15. Management of the onboard computer on models of release till January, 1988
   1.16. Blocking of the internal handle of the lock of a back door
   1.17. Обкатка the car
   1.18. Car check before departure
   1.19. Replacement of operational liquids and lubricants
   + 1.20. Servicing of cars of release till August, 1985
   + 1.21. Servicing of cars of release since August, 1985
   1.22. Periodicity of greasing of knots of the car
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

1.9.1. The carburettor engine
PERFORMANCE ORDER
1. To include ignition.
2. To include a starter, without pressing an accelerator pedal.
3. If the engine was not started during 10 with, to stop start. Repeatedly to start up the engine it is possible approximately through 30 with.
4. If the engine was not started from three attempts, it is necessary to find and eliminate malfunction.
5. At air temperature more low 0 ° With the ambassador of start-up of the engine it is possible to get under way from a place in some seconds.
6. At start-up of the hot engine it is necessary to press a pedal of an accelerator at the moment of start-up. After the engine has started to work, release an accelerator pedal.


On the main page