Audi 100

1982-1990 of release

Repair and car operation




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
+ 7. Transmission
+ 8. A running gear
- 9. A steering
   9.1. A technical characteristics
   9.2. A steering wheel
   + 9.3. A steering column
   9.4. The steering mechanism
   9.5. Adjustment of the mechanism of a steering
   9.6. Steering draught
   9.7. The pump of the hydraulic booster of a steering
   9.8. Check of pressure of forcing of the pump of the hydraulic booster of a steering
   9.9. Prorolling of system of the hydraulic booster of a steering
   9.10. A privodnoj belt of the pump of the hydraulic booster
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment

9.8. Check of pressure of forcing of the pump of the hydraulic booster of a steering
PERFORMANCE ORDER
1. To turn away bringing bolt and to disconnect from the pump bringing hose and to connect instead of it a hose with a manometre.
2. To start the engine and to leave to work it idling.
3. To turn out against the stop wheels in any party, to check up pressure on a manometre and at once to turn wheels in a starting position. This operation should occupy no more than 30 with, otherwise the pump can fail. Pressure should be 14 500-15 500 кПа (145–155 kgs/sm2).
4. If pressure differs from specified, it is necessary to replace the valve of a high pressure and to execute repeated check. If pressure does not correspond again to norm, the pump is faulty also it it is necessary to replace.


On the main page