Since 1986-1991 of release
Repair and car operation
- 1.2. Car identification
1. The maintenance instruction
1.3. An arrangement of identification tablets
1.4. The panel of devices
- 1.5. Car service
1.5.2. Seasonal change of type of fuel
1.5.3. Petrol additives
1.5.4. The latest news in the field of fuel
1.5.5. A cowl
1.5.6. An engine compartment
- 1.5.7. Engine oil
184.108.40.206. Engine oil identification
220.127.116.11. Engine oil consumption
18.104.22.168. Check of level of oil in the engine
22.214.171.124. Oil addition in the engine
126.96.36.199. Engine oil replacement
1.5.8. The oil filter of the engine
+ 1.5.9. Liquid automatic gearbox
1.5.10. Oil manual transmission
1.5.11. The air filter
1.5.12. Spark plugs
+ 1.5.13. The hydraulic booster of a steering and the amplifier of brake system
+ 1.5.14. A brake liquid
+ 1.5.15. Cooling system
+ 1.5.16. Tanks for washers of a windscreen and headlights of forward light
1.5.18. Brushes of screen wipers
+ 1.5.19. Wheel Tyres /
+ 1.6. Independent service of the car
+ 1.7. Specifications
1.9. The sizes
1.11. The schedule of preventive servicing / of greasing of the car
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
+ 5. Fuel system
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
+ 12. A body, salon
+ 13. A central air
+ 14. An electric equipment
Audi-80/Audi-80 Quattro, Audi-90/Audi-90 Quattro
Audi-90 Quattro 20V, Aуди Compartment Quattro
Is better to check oil level when the engine is heated-up.
Muffle the engine.
For reception of exact measurements the car should stand on an equal surface. After a stop of the engine wait some minutes that oil has gathered in the oil pallet.
Pull out probe for measurement of level of oil and wipe it dry by means of a rag.
Insert probe: insert it up to the end that measurement was exact.
Again pull out probe. Oil level in norm if it is between marks "Max" and "Min" on probeе.
If level of oil below a mark "Min" or is not designated absolutely, immediately add oils.
After definition of level of oil insert probe up to the end into an aperture.
On the main page