Audi 80/90/Coupe

Since 1986-1991 of release

Repair and car operation



Audi 80/90/Coupe
+ 1.2. Car identification
+ 2. Engines, carburettors
3. Greasing system
+ 4. Cooling system
- 5. Fuel system
   - 5.2. Systems of injection of fuel
      5.2.1.2. Specifications (4-cylinder models)
      5.2.1.3. Components of system of injection for 5-cylinder models
      5.2.1.4. Specifications (5-cylinder models)
      5.2.1.5. A starting position of a plate of the gauge of an air stream
      5.2.1.6. A free wheeling of a plate of the gauge of an air stream
      5.2.1.7. The lever of a plate of the gauge of an air stream
      5.2.1.8. Operating плунжер
      5.2.1.9. The throttle valve
      5.2.1.10. A rope of management throttle заслонкой
   5.2.2. Fuel injectors (20-klapannye models)
   + 5.2.3. An electronic control system of engine MPI
+ 6. An exhaust system
+ 7. Ignition system
+ 8. Transmission
+ 9. Suspension brackets, wheels
+ 10. Brake system
+ 11. A steering
+ 12. A body, salon
+ 13. A central air
+ 14. An electric equipment

5.2.1.5. A starting position of a plate of the gauge of an air stream Check

The top side of a plate of the gauge of an air stream should be below the bottom side of an air funnel:
And = 1.9 – 3.0 mm
Adjustment

PERFORMANCE ORDER
1) lift a plate of the gauge of an air stream
2) adjust position of a plate of the gauge, bending скобу electroconducting fastenings (it is specified by an arrow)

Try to establish the least value and = 1.9 mm.


The prevention

Do not scratch a tube of Venturi of the gauge of an air stream.

Do not drive a lamellar spring.



On the main page