Audi 80/Avant (B4)

Since 1991-1995 of release

Repair and car operation



Audi 80/Avant
+ The description
+ Engines
+ System of release of the fulfilled gases
+ Cooling system
+ Fuel tank and the fuel pump
+ The air filter and воздухозаборные channels
+ Injection system
+ Coupling
+ Transmission and transmission
- Suspension bracket and steering
   The control of a condition of a casing of the steering mechanism
   Check of dustproof covers and люфта tips of cross-section steering draughts
   Check of dustproof covers of hinges of a forward suspension bracket
   Check люфта a steering
   Check клинового or поликлинового a belt
   Check of level of a working liquid
   Check люфта the bearing of a nave of a wheel
   Shock-absorbers
   The list of malfunctions
   Adjustment of corners of installation of wheels
   Measurement of adjustment of corners of installation of wheels
   The list of malfunctions
   Running gear and steering repair
   Repair of a forward suspension bracket
   Repair of a back suspension bracket
   Steering
   Steering repair
   The list of malfunctions
   Adjustment of the steering mechanism
   Refuelling by a liquid and prorolling of hydrosystem of the amplifier of a wheel
   Safety pillow
   Safety precautions requirements
+ Brake system
+ Antiblocking system of brakes
+ Wheels and tyres
+ Kuzovnaja electrosystem
+ Ignition system
+ Illumination
+ Signalling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ Body elements
+ Search of malfunctions
+ Specifications

Steering repair

Check on tightness of the steering mechanism with the amplifier

If in a receiver the lowered level of a liquid it is necessary to check up all system of the steering mechanism as soon as possible is found out. Otherwise the amplifier of the steering mechanism can suddenly stop work during movement. The sequence of check is more low resulted:

 PERFORMANCE ORDER

  1. To turn out a steering wheel once to the right and once on the left against the stop. Thus in the wheel hydraulic booster the highest possible pressure is formed, and not tight places become more appreciable.
  2. To leave a steering wheel in one of extreme positions and to check up following places on негерметичность:
  3. The rotornyj valve. It is located approximately there where the steering column incorporates to the steering mechanism. The working liquid in this case acts in car salon under a control panel on a forward wall.
  4. Подтекание on a sealing lining gear рейки or a sealing lining in the left tip. For check to weaken clips of a casing and to shift it aside.
  5. On the hydraulic pump. For revealing негерметичности, probably, before check it is necessary to wash the engine.
  6. On connections of pipelines. It is necessary to check up and if necessary дозатянуть all connections separately.

Клиновой and поликлиновой belts

In more details about клиновом or поликлиновом a belt of the hydraulic pump you learn the Generator in section.


On the main page