Audi 80/Avant (B4)

Since 1991-1995 of release

Repair and car operation



Audi 80/Avant
+ The description
+ Engines
+ System of release of the fulfilled gases
+ Cooling system
+ Fuel tank and the fuel pump
+ The air filter and воздухозаборные channels
+ Injection system
+ Coupling
+ Transmission and transmission
- Suspension bracket and steering
   The control of a condition of a casing of the steering mechanism
   Check of dustproof covers and люфта tips of cross-section steering draughts
   Check of dustproof covers of hinges of a forward suspension bracket
   Check люфта a steering
   Check клинового or поликлинового a belt
   Check of level of a working liquid
   Check люфта the bearing of a nave of a wheel
   Shock-absorbers
   The list of malfunctions
   Adjustment of corners of installation of wheels
   Measurement of adjustment of corners of installation of wheels
   The list of malfunctions
   Running gear and steering repair
   Repair of a forward suspension bracket
   Repair of a back suspension bracket
   Steering
   Steering repair
   The list of malfunctions
   Adjustment of the steering mechanism
   Refuelling by a liquid and prorolling of hydrosystem of the amplifier of a wheel
   Safety pillow
   Safety precautions requirements
+ Brake system
+ Antiblocking system of brakes
+ Wheels and tyres
+ Kuzovnaja electrosystem
+ Ignition system
+ Illumination
+ Signalling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ Body elements
+ Search of malfunctions
+ Specifications

Check люфта the bearing of a nave of a wheel

Forward wheels движутся on двухрядных ball-bearings. Behind on front-wheel models radially-persistent conic roller bearings are established. On all-wheel drive cars behind there are same ball-bearings, as well as in front. They установленны on консистентную greasing and usually serve much longer 100 000 km. Defective bearings attract attention noise at movement. If noise becomes louder, for example on the right turns, means, the left bearing of a nave of a wheel is faulty.

 PERFORMANCE ORDER

  1. Try to turn one behind another wheels firmly standing on the earth concerning their vertical axis.
  2. At serviceable bearings should not be almost any люфта.
  3. If люфт it is notable, ask the assistant to press strongly a pedal of a brake and once again shake a wheel: if it is not felt any more люфта, means, the reason only in the bearing.
  4. If still is available люфт: it is necessary to check up a wheel suspension bracket.
  5. Now it is necessary to lift the car and to turn a wheel: if it moves hard or jerky, means, the bearing is established too hardly. If you distinctly hear a gnash, it is necessary to replace the bearing.

 The help: back bearings of naves of wheels of front-wheel models can be regulated. Back bearings of all-wheel drive models, and also bearings of all forward wheels are not regulated.


On the main page