| 1. For хоннингования it is recommended to use "ершик". Preliminary put covers of radical bearings and tighten bolts with the set moment. |
| 2. Clamp the adaptation in an electrodrill. |
|
3. Well oil a cylinder surface, include an electrodrill both periodically move upwards and downwards in the cylinder. Thus on a surface of walls of the cylinder the structure of the thin lines crossed at an angle nearby 60 ° should be formed. Ершик to get only after a full stop of a drill. |
| 4. After хоннингования carefully clear and wash out the block of cylinders. At sufficient degree of cleanliness on the pure white rags moistened with oil, should not remain particles of grey colour if to spend it on a cylinder wall. |