BMW 3 series E30

Since 1983-1994 of release

Repair and car operation



BMW E30
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmissions
- 9. Coupling
   9.2. Specifications
   9.3. Coupling check
   9.4. The main cylinder of coupling
   9.5. A coupling pedal
   9.6. The blocking switch of coupling
   9.7. The working cylinder of coupling
   9.8. Removal of air from a coupling hydrodrive
   9.9. Coupling details
   9.10. A kardannyj shaft
   9.11. Elastic муфта
   9.12. An average support
   9.13. Kardannye hinges
   9.14. The forward aligning plug
   9.15. The SHRUS карданного a shaft
   9.16. Semiaxes
   9.17. SHRUS and covers
   9.18. Epiploons of a reducer of a back axis
   9.19. A reducer of a back axis
   9.20. An epiploon of a leading gear wheel of a reducer
+ 10. Brake system
+ 11. A running gear
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice





9.5. A coupling pedal
THE GENERAL DATA

Counternut of a rod of a pedal of coupling

For adjustment displace a cover, release a counternut (1) and rotate a rod for лыски (2).

Check and adjustment


The prevention

Pedal adjustment is required only at replacement of the main cylinder.


PERFORMANCE ORDER
1. Check up distance And from an edge of a pedal to a partition.
2. For adjustment release a nut and a pusher bolt. The clown providing moving of a pedal at rotation of a bolt has a bolt. After pedal adjustment tighten a nut. If the label it should be located on one straight line with the cylinder is put on a pedal bolt and turned from the cylinder.
3. On a part of cars additional adjustment which is provided with rotation of a rod of the main cylinder at the released counternut is provided.
The prevention

It is not supposed to wrap a pusher to a limit. After adjustment be convinced that between a counternut and a pedal there is a backlash. Otherwise the pusher will pursue.

Do not draw a counternut of a pusher in order to avoid carving failure.


On the main page